Moody Spreading Draft Tube

Moody Spreading Draft Tube. Moody spreading draft tube iv. Draft tube has two purposes i) it permits suction head at a runner exit.

Draft Tubes -Types,Working And Efficiency[Complete Guide] - Mechanical Walkins from www.mechanicalwalkins.com

He has tried everywhere for the design information. Simple elbow draft tube iii. I am so proud of him!!!

Source: www.mechanicalwalkins.com

1.1 types of draft tube: Moody spreading draft tube iv.

Source: en.wikipedia.org

1.1 types of draft tube: Outlet of draft tube should be suited below tail race.

Source: commons.wikimedia.org

To everyone, my friend tony murtagh, in france, has been very interested in using a moody spreading cone draft tube at his small site. 1.1 types of draft tube:

Source: commons.wikimedia.org

It has one inlet and two inlets. So the working fluid changes the pressure as it moves across the turbine and gives energy.

Source: mechanicaljungle.com

The reason of not using draft tube in impulse turbines is that there is no change in pressure during the whole process. There are 3 types of draft tube:

Source: www.hkdivedi.com

There are four different types of draft tube: This type of draft tube has a shape similar to the shape of a frustum of a cone.

Source: commons.wikimedia.org

Schematic of a kaplan turbine. A moody spreading draft tube will have a solid central core at center, as displayed in figure, to reduce the whirling.

Source: www.youtube.com

It works is to discharge the water from the tailrace. In this type of draft tube there will be one inlet and two outlets.

Source: learnmechanical.com

Moody_spreading_draft_tube,_churchill_river,saskatchewan,_canada.jpg ‎ (800 × 474 pixels, file size: The angle of the cone is limited to 8 degrees and it has a maximum efficiency of 90%.

Source: www.mechanicaleducation.com

It is tapered in shape and the outlet diameter is larger than. Only rate of change of momentum contributes to get power in.

Source: commons.wikimedia.org

This draft tube is fabricated with mild steel plates. Simple elbow draft tube iii.

The Angle Of The Cone Is Limited To 8 Degrees And It Has A Maximum Efficiency Of 90%.

This is more efficient in energy recovering at swirl motion and linear motion of water. Outlet of draft tube should be suited below tail race. It reduces the whirling action of water.

In This Type Of Draft Tube The Flow Path Is Straight And Divergent.

To everyone, my friend tony murtagh, in france, has been very interested in using a moody spreading cone draft tube at his small site. Four types of the draft tube are available as listed below: There are 3 types of draft tube:

Image/Jpeg) File Information Structured Data

If the cone angle is more then there is a chance of cavitation. This tube similar to conical draft tube. 1.1 types of draft tube:

In This Type Of Draft Tube There Will Be One Inlet And Two Outlets.

Moody spreading draft tube : The main function of the tube is to reduce the velocity of (water flowing) at the time of discharge. This type is used for the low head.

This Type Of Draft Tube Has A Shape Similar To The Shape Of A Frustum Of A Cone.

Efficiency of this type of draft tube is about 70%. Kaplan turbine is an axial flow reaction turbine. It's efficiency is about 88%.